G R F Dynamic Engineering

We are enlisted among st leading and trusted companies for offering a wide range of Stainless Steel Mixing Tank. Specifications:Size: CustomizedMaterial: Stainless steelCapacity: 1000L Uses:Chemical IndustryPharmaceuticals Industries

1. Capacity & TypeNominal capacity: 1000 L (usable ~900–950 L depending on freeboard)Type: Vertical cylindrical tank with dished top & bottom, jacketed, with top-mounted agitator.Mounting: Skid-mounted or leg-mounted with adjustable SS legs & leveling pads.
2. Material of Construction (MOC)Tank shell & bottom: SS 304 or SS 316 (food/pharma grade)Jacket: SS 304 (mild steel possible for chemical, cost-saving)Agitator shaft & blades: SS 304/316Gaskets & seals: Food grade PTFE / EPDMSurface finish:Internal: Mirror polish (Ra ≤ 0.4 μm for pharma, ≤ 0.8 μm for food)External: 2B finish or matt finish
3. Dimensions (Approx.)For 1000 L jacketed tank, assuming vertical orientation:Internal diameter (ID): ~1,050 mmStraight height: ~1,200 mmTotal height with agitator motor: ~2,200–2,500 mmJacket thickness: 1.5–3 mm (pressurizable if required)Shell thickness: 3–4 mm (SS 304)(Dimensions may vary based on design pressure, heating/cooling load, and freeboard requirements.)
4. Jacket DetailsType: Dimple jacket / Limpet coil / Plain jacketOperating pressure: Up to 3–5 bar (steam or chilled water)Inlet/Outlet: 1" or 1.5" BSP/NPT or flange connectionInsulation: 50 mm glass wool / rock wool + SS cladding for energy efficiency
5. Agitator SpecificationsType:For liquid–liquid: Propeller or pitched blade turbineFor viscous: Anchor with scrapers + high-shear disperser (optional)Mounting: Top-mounted gearbox driveMotor: 1–3 HP (depending on viscosity)Speed: Variable (20–200 RPM) or fixed, via VFDSealing: Mechanical seal or stuffing box
6. Nozzles & ConnectionsTypical nozzles on a 1000 L jacketed agitator tank:Top:Manhole (400 mm)Agitator entryVent filter connection (DN25)CIP spray ball inlet (DN25)Side:Level indicator / sight glassTemperature sensor (PT100 / thermowell)Bottom:Drain valve: SS butterfly / ball valve (1.5"–2")Jacket:Steam/Hot water inlet & condensate outletCooling water inlet & outlet
7. Utilities RequiredPower: 3-phase for agitator motor & controlsHeating: Steam boiler or hot water systemCooling: Chilled water or brine supplyCompressed air: For pneumatic valves (if any)
8. Optional FeaturesPLC control panel with temperature, RPM, and timer controlLoad cell for weight-based batchingBottom entry homogenizerExplosion-proof motor for hazardous areasMobile skid with casters for portability

we GRF DYNAMIC ENGINEERING dealing with A chemical reaction pressure vessel is a specially designed container used to carry out chemical reactions under pressure, often above atmospheric levels. These vessels are critical in industrial and laboratory processes where reactions require controlled environments of temperature and pressure to proceed efficiently or safely.
Key Features:
1. Material Construction:
Typically made of stainless steel, Hastelloy, or other corrosion-resistant alloys.
Lined with inert materials (e.g., glass or Teflon) for handling corrosive reactants.


2. Design Specifications:
Must withstand high pressures and temperatures.
Built to comply with standards like ASME Boiler and Pressure Vessel Code.
Equipped with safety relief valves, pressure gauges, and temperature sensors.

3. Types of Reactions:
Hydrogenation
Polymerization
Oxidation/reduction
Hydrothermal synthesis
4. Components:Reactor body: Main chamber where the reaction occurs.
Agitator: Ensures proper mixing of reactants.
Heating/cooling jacket: Controls the reaction temperature.Inlets/outlets: For feeding reactants and removing products or sampling.
5. Applications:Chemical manufacturing
PharmaceuticalsPetrochemical processingMaterial synthesis

Chemical Reaction Pressure Vessel – Technical Specification
1. General Information:
Type: High-Pressure Chemical Reactor Vessel
Design Code: ASME Section VIII, Div. 1 / PED (as applicable)
Application: Batch/Continuous chemical reactions under pressure and temperature
2. Design Parameters:
Design Pressure: Up to 100 bar (customizable)
Design Temperature: -20°C to +300°C
Operating Pressure: As per process requirement
Operating Temperature: As per process requirement

3. Material of Construction:
Shell & Head: SS316 / SS304 / Hastelloy C-276 / Alloy 20 (as per chemical compatibility)
Lining (if required): Glass-lined / PTFE-lined
Gasket: PTFE / Graphite / Spiral wound (based on pressure/temp)
Nozzles: SS316 / same as shell
4. Vessel Configuration:
Type: Vertical / Horizontal Cylindrical
Head Type: Ellipsoidal / Torispherical / Flat
Capacity: 10 L – 10,000 L (customizable)
5. Agitation System:
Agitator Type: Anchor / Propeller / Turbine / Magnetic Drive (sealed)
Drive: Top-mounted / Bottom-mounted motor (flameproof optional)
Speed: Variable (0–300 RPM or custom)
6. Heating/Cooling System:
Jacket Type: Limpet coil / Dimple jacket / Full jacket
Heating Medium: Steam / Hot oil / Electric heater
Cooling Medium: Water / Brine / Glycol
7. Instrumentation:
Pressure Gauge / Transmitter
Temperature Sensor (RTD / Thermocouple)
Level Indicator / Sight Glass
Safety Relief Valve / Rupture Disc
Sampling Valve
Control Panel: Optional (with PLC)
8. Nozzle Arrangement (Typical):
Feed Inlet
Product Outlet
Pressure Relief
Instrumentation Ports
Manhole / Handhole
9. Testing and Certification:
Hydrostatic Test: 1.5x Design Pressure
Radiography / NDT: As per code requirement
Inspection Certificate: EN 10204 3.1 / 3.2
Third-Party Inspection: Optional

A 2000-litre SS jacketed tank is commonly used in industries like food processing, pharmaceuticals, cosmetics, and chemicals for heating, cooling, or maintaining temperature of the contents. Here's a quick overview of such a tank:
🔧 Technical Specifications (Typical)
Parameter Details
Capacity 2000 Litres (2 KL)Material SS304 / SS316 (Food/Pharma Grade)Type Jacketed (for heating/cooling)Insulation Optional: Rockwool/PUF + SS/MS CladdingOuter Jacket SS304 or Mild Steel (as per cost)Design Pressure 3-5 bar (depending on process)Agitator Optional (Top/Bottom Mounted)Manhole Yes (top or side)Nozzles Inlet, Outlet, Vent, Thermowell etc.Mounting Skid-mounted / Leg-supported

🔥 Jacket Options
Limpet Coil Jacket – For high-pressure steam/oil
Dimple Jacket – Light-weight, cost-effective
Full Jacket – Uniform heating/cooling

✅ Common Applications
Milk or edible oil heating
Fermentation and mixing
Buffer/storage tanks in process industries
Chemical reaction or temperature-sensitive mixing


---
📐 Approximate Dimensions (Can Vary by Design)
Shape Diameter Height
Vertical Cylinder ~1000–1200 mm ~2000–2200 mm
Optional Features
Temperature/pressure gauges
CIP/SIP system
VFD for mixer
Load cell for weight monitoring
Flameproof motor (for hazardous use)


✅ 2. Type of Jacket
Choose the type:
 Limpet Coil (for high-pressure steam or oil)
 Dimple Jacket (for uniform, low-pressure heating/cooling)
 Plain Outer Jacket (basic, cost-effective)

✅ 3. Material Grade
Tank material:
 SS304 (common for food, general use)
 SS316 (for pharma, corrosive chemicals)

✅ 4. With or Without Agitator?
 Yes (with mixer – top or bottom mounted?)No✅ 5. Insulation & Outer Jacket With insulation (PUF or Rockwool) + outer cladding (SS/MS)?No insulation
✅ 6. Pressure Requirement
If it's a pressure vessel or needs steam:
Operating pressure (e.g. 3 bar / 5 bar)?
Atmospheric pressure is enough?

WE ARE DEALING WITH SS Jacketed Mixer 500 KL TO 50KL 
A blending mixer is a machine used to mix two or more substances uniformly in a liquid, semi-liquid, or powder form. It ensures homogeneous blending of materials inside a tank or vessel.


✅ Key Features of a Blending Mixer:
Mounted on or inside a blending tank.
Typically driven by an electric motor (sometimes with gearbox or VFD).Uses impellers (propeller, anchor, paddle, turbine) to mix contents.May operate at variable speeds depending on the material viscosity.Can be top-entry, side-entry, or bottom-entry.⚙ Functions:Mixing liquids together (e.g., chemicals, oils, syrups).Suspending solids in a liquid (e.g., paints, pharma slurries).Blending ingredients in food, cosmetics, or pharma.Maintaining uniformity and preventing settling.Used during heating/cooling to ensure even temperature distribution.�� Common IndustriesPharmaceutical – API mixing, syrups.Food & Beverage – Juices, sauces, milk.Chemical – Emulsions, solutions.Cosmetic – Creams, lotions.Paint & Coatings – Pigments, additives.

Parameter       Specification
Capacity              500 KL (500,000 Liters)
MOC                        SS304 / SS316 / SS316lJacket Type         Dimple jacket / Limpet coil jacketJacket MOC   Same as main vesselAgitator Type    Anchor / Paddle / Propeller / Turbine / HelicalAgitator MOC     SS316 or SS304Drive Mechanism    Top-mounted
Gearbox                 36 rpm Motor Power    30 HP to 75 HP (Depending on 
Speed (RPM) 10–80 RPM (Variable with VFD)Mixing Capacity Up to 100% of volume with baffles Insulation         Glass wool / Mineral wool with SS claddingBaffles           Internal vertical bafflesTop Cover           Elliptical / Dish end with manholeBottom Design   Conical /                               Inlet, Outlet, Vent, Manhole, Pressure, Temp, CIPSurface Finish (Internal) Mirror polish (Ra < 0.4 µm)Surface Finish (External) Matt / 2B FinishTesting                         Hydro test 
Radiography as neededPressure Rating (Vessel) Atmospheric to 5 Bar Jacket Pressure Rating Up to 6–10 Bar (for heating/cooling)Temperature Range        -10°C to 200°C 
�� Applications:
Chemical blendingPharmaceutical and API mixingCosmetic cream or lotion processingFood-grade syrup or paste mixingOil and lubricant manufacturing
�� Important Notes:CIP (Clean in Place) and SIP (Steam in Place) systems can be integrated.
Mixer design can be customized for batch or continuous operation.Heating media in jacket: Steam, Hot Water, Hot OilCooling media: Chilled water, Brine, GlycolVessels can be mounted on platform or RCC base
�� Approximate Dimensions (L × W × H):Depends on orientation and designDiameter: ~5000–6000 mmHeight: ~8500–10000 mmWeight: ~25–35 MT (with jacket & insulation)
✅ Optional Add-ons:Load cells (for weighing)SCADA/PLC AutomationFlameproof motorLevel sensorsTemperature sensorsPressure relief valves