G R F Dynamic Engineering

We are dealing with An SS 304 hot water tank (capacity range 1000L to 5kl ) refers to a hot water storage tank made from Stainless Steel 304, a commonly used stainless steel grade known for its excellent corrosion resistance, durability, and hygiene. Here's a detailed description 
SS 304 Hot Water Tank – DescriptionMaterial:The tank is constructed using Stainless Steel 304 (SS304), an austenitic stainless steel alloy containing 18% chromium and 8% nickel. This composition offers superior resistance to rust, scaling, and corrosion, especially in moist or heated environments.
Purpose:Designed for storing and supplying hot water, typically in residential, commercial, or industrial settings. It can be integrated with solar water heating systems, electric heaters, or boiler-fed systems.
Key Features:Corrosion Resistance: Suitable for use with hot water due to its high resistance to oxidation and corrosion.Hygienic and Safe: Non-reactive material ensures water quality is maintained.Durable Construction: Withstands thermal expansion and contraction cycles.Temperature Range: Generally safe for use with water temperatures up to 85–90°C, depending on insulation and design.Design Options:Vertical or horizontal orientationInsulated with PU foam or glass wool to minimize heat lossCapacity: Available from small (50 liters) to large (5000+ liters)Fittings: Inlet/outlet ports, thermometer, pressure relief valve, drain valve
Applications:Domestic hot water systemsSolar water heatersHospitals and hotelsIndustrial hot water processes
Technical Specification – SS 304 Hot Water Tank
Parameter Specification
Material (Inner Tank) Stainless Steel 304 (SS304), food-grade, 2B finishMaterial Thickness 1.5 mm – 3.0 mm (depending on capacity & pressure rating)Outer Shell (optional) SS304 / Powder-coated GI / AluminumInsulation Polyurethane Foam (PUF) / Glass Wool, 50 mm thickInsulation Density 35–40 kg/m³Capacity 100L to 5000L or more (customizable)Tank Orientation Vertical / Horizontal (as required)Design Pressure 3–6 bar (standard); higher on requestWorking Temperature Up to 90°CTesting Pressure 1.5 × design pressureFittings Inlet, outlet, drain, air vent, temperature gauge, PRVManhole Access Provided for tanks above 1000L (if required)Mounting Skid base / Stand-mounted / Wall-mounted (for small units)Corrosion Protection Not required for inner tank due to SS304 materialStandards ASME / IS / EN standards (as applicable)

We are dealing with Ghee storage tank  is a facility designed to extract pure ghee (clarified butterfat) from milk by separating the milk solids and water from the butterfat, resulting in a product with a high smoke point and extended shelf life;A well-optimized ghee processing plant can improve production efficiency, ensure quality, and meet regulatory standards. it is avalable from1kl to 5kl,10kl 

Storage Tank 25KL MS IS 2062 Horizontal

 

We are dealing with  " High Pressure and temperature VESSELS"(1000L to 10kl) refers to a storage container made from stainless steel designed to withstand and hold liquids or gases at significantly elevated pressures, often used in industrial applications where high pressure resistance and corrosion resistance are crucial; essentially, it's a robust, stainless steel tank capable of handling considerably higher pressure than standard tanks, commonly used in chemical processing, food and beverage production, and pharmaceutical industries due to its hygienic properties
High-pressure vessel specifications for 1 KL to 10 KL capacity, including specifications, description, and MOC (Material of Construction) — suitable for gases or liquids under high pressure in industries like chemical, pharmaceutical, food, and gas storage:
1KL to 10KL High Pressure Vessel SpecificationsParameter DetailsCapacity Range 1,000 Liters (1 KL) to 10,000 Liters (10 KL)Design Pressure Up to 50 bar (can vary: 10, 25, 40, or 100 bar based on application)Test Pressure 1.5 × Design Pressure (Hydrostatic or Pneumatic test)Temperature Range -20°C to +200°C or as per process requirementShape/Type Vertical / Horizontal cylindrical with dished ends (ellipsoidal heads)Wall Thickness Depends on design pressure (typically 6 mm to 20 mm; confirmed by ASME/IS)Design Code/Standard ASME Sec VIII Div 1 / IS 2825 / PED / TEMACorrosion Allowance 1.5 mm (standard, can be higher in corrosive applications)Insulation Optional (Glass wool / Rockwool with SS304 cladding for thermal insulation)Legs / Skirt / Saddle Based on orientation:Legs for verticalSaddle for horizontal       | | Manhole / Nozzles         | Manhole: 18” (typical),Inlet/Outlet/Drain/Vent/Relief Valves/Gauges | | Surface Finish            | Internal: 150-400 grit polish (pharma),External: 2B/Matte/Sandblasted       | | Painting / Coating        | Epoxy / PU paint / Anti-corrosive coating or polished finish (SS)           |Material of Construction (MOC)Part Common MOC Use/ApplicationShell & Dished Ends SS304 / SS316 / SA516 Gr 70 / SA387 / Duplex SS SS for food/pharma; SA516/387 for gas or chemical storageNozzles / Flanges SS304 / SS316 / CS IS2062 / A105 / A182 As per fluid compatibilityGaskets PTFE / CAF / Spiral Wound Gaskets For leak-proof sealingFasteners SS304 / SS316 / B7 Studs with 2H nuts High tensile strengthLegs/Saddle/Support IS2062 / SS304 / SS316 Depending on load and corrosion resistanceInsulation Material Glass Wool / Rockwool with SS304 cladding Optional for thermal applicationsStandard AccessoriesPressure Relief Valve (PRV)Level Gauge / Sight GlassTemperature GaugePressure GaugeVent NozzleDrain NozzleSafety ValveLifting LugsEarthing LugApplication IndustriesPharmaceuticalPetrochemicalChemicalFood ProcessingGas Storage (Nitrogen, CO₂, Oxygen, etc.)

1. Basic Description
We are dealinf with A Mild Steel Pressure Tank 5kl to 50kl  is a closed container used to store and handle liquids or gases under pressure. These are often used in chemical, pharmaceutical, water treatment, and industrial processes.

⚙ 2. Specifications

Parameter                       Description
Material Mild Steel            MS IS 2062
Tank CapaciTY                  500 L to 50,000
Design Pressure                3 bar to 20 bar
Hydro Test Pressure          1.5 to 2 times of design pressure
Design Code  
Shape                              Vertical / Horizontal cylindrical
Ends                                Dished / Flat / Conical Ends
Thickness                         5 mm to 25 mm Nozzles                         
Finish                               Red Oxide Primer + Epoxy / Rubber liningMounting                         Skid-mounted / Leg-supported Accessories                 Pressure gauge, safety valve 

�� 3. Suitable for Storing Chemicals Like:Acids (with lining)AlkalisSolventsWater (DM, RO, etc.)Petroleum productsIndustrial chemicalsNote: For corrosive chemicals, rubber or FRP lining is applied inside the MS tank.�� 4. Lining OptionsLining Type PurposeFRP Lining Prevents corrosion from acids/alkalisRubber Lining Heavy-duty acid-proof coatingEpoxy Coating General chemical resistanceGlass Lining For pharma/food use (less common in MS tanks)�� 5. Dimensional Sample (for 5 KL Tank)Dimension Approximate ValueDiameter 1500–1800 mmHeight (Vertical) 2500–3000 mmShell Thickness 6–10 mmHead Thickness 8–12 mmWeight (approx.) 600–1200 kg�� 6. Certifications & StandaRD IS 2062 / IS 2825 (Indian Standards)ASME Section VIII Div 1IBR (if used with steam)ISO 9001 (for manufacturing)PESO (for flammable liquids, if applicable)�� 7. ApplicationsChemical storage and dosingEffluent and wastewater treatmentProcess reactors (with agitator)Buffer tanksSolvent collectionFirewater storage⚠ 8. Safety ConsiderationsPressure relief valves mandatoryProper earthing and bonding (for flammable liquids)Venting for pressure balanceRoutine hydro testingRegular lining inspection✅ 9. AdvantagesCost-effective compared to SS tanksCustomizable size and fittingsDurable with proper coatingEasy maintenance❌ 10. LimitationsNot suitable for corrosive chemicals without liningHeavier than plastic/FRP alternativeShorter life span compared to stainless steel
1. Material:Made from Mild Steel (IS 2062) – strong but prone to rust, so lining or coating is often needed.

2. Use:Stores chemicals under pressure – used in industries like chemical, pharma, oil, water treatment.

3. Design Pressure:Generally 3–20 bar; must be designed per ASME Section VIII Div. 1 or IS 2825.

4. Capacity Range:Custom-built – from 500 liters to 50,000 liters (50 KL).

5. Shape:Usually cylindrical, vertical or horizontal with dished or conical ends.

6. Coating/Lining: