G R F Dynamic Engineering

Stainless Steel Jacketed Reactor Vesselrange start from 1000l to 20kl A Stainless Steel Limpeted and Jacketed Reactor Vessel is a type of industrial processing equipment used extensively in chemical, pharmaceutical, and food industries. It is designed for mixing, heating, cooling, and chemical reactions under controlled conditions of temperature and pressure.
Key Features and Description:
1. Material Construction:
Fabricated using high-grade stainless steel (SS 304, SS 316, or SS 316L) for superior corrosion resistance, hygiene, and durability.
2. Jacketed Design:
The vessel is equipped with an external jacket, typically a double-walled structure, allowing the circulation of heating or cooling fluids (like steam, hot oil, or chilled water) around the reactor body for thermal control.
3. Limpet Coil:
An additional limpet coil (a half-pipe or spiral coil welded onto the vessel exterior or sometimes interior) is provided to enhance heat transfer efficiency.
Limpet coils are used for high-pressure heating or cooling media, often where higher heat transfer rates are needed compared to jackets.
4. Agitator Mechanism:
Often includes a mechanical agitator mounted from the top or bottom, driven by a motor, for uniform mixing and heat distribution.
5. Pressure Rating:
The vessel may be designed for vacuum or pressure operation (usually from full vacuum to several bar), depending on process requirements.
6. Thermal Insulation:
The vessel may be thermally insulated with glass wool or mineral wool and covered with a cladding layer (usually SS or aluminum) to minimize heat loss.


7. Nozzles and Accessories:
Multiple nozzles are provided for feed inlet, product outlet, pressure gauge, temperature sensor, vent, safety valve, etc.
8. Applications:
Used for chemical reactions, polymerization, crystallization, and fermentation.
Common in API manufacturing, specialty chemicals, and dye industries

Typical Specification – SS Limpeted and Jacketed Reactor Vessel
Parameter Specification
Capacity 500 Liters – 30,000 Liters (customizable)Material of Construction SS304 / SS316 / SS316LDesign Pressure (Shell) -1 to +6 kg/cm² (Vacuum to Pressure)Jacket Pressure Up to 6 kg/cm²Limpet Coil Pressure Up to 12 kg/cm² (Steam, Hot Oil, or Chilled Water circulation)Operating Temperature -10°C to +200°C (or more, depending on material)Agitator Type Anchor / Turbine / Propeller / Paddle (as per mixing requirement)Agitator Drive Motor with gearbox, Variable Frequency Drive (VFD) optionalNozzles Inlet, Outlet, Vent, Pressure Gauge, Temp Sensor, Manhole, etc.Surface Finish Internal: Mirror / Electro-polished (0.4 to 0.8 µm Ra) External: Matt finish / BuffedJacket Type Dimple Jacket / Plain JacketLimpet Coil Material SS304 / SS316 (same or different from vessel body)Mounting Type Leg-supported / Skirt-supported / Saddle-mountedInsulation Optional: Glass wool or Mineral wool with SS or aluminum claddingGMP Compliance Optional – for pharmaceutical-grade equipmentTesting & Certification Hydrotest, Radiography, Material Test Certificate (MTC), etc.

A 2kl-25kl SS Stainless Steel Buttermilk and Curd Storage Tank Description

Purpose:

These tanks are designed to hygienically store curd or buttermilk at controlled temperatures before further processing or packaging. They are ideal for use in dairies, food processing plants, and commercial kitchens.

Material of Construction:

Primary Material: Food-grade Stainless Steel SS304 or SS316 (for enhanced corrosion resistance)

Inner Surface Finish: Mirror polished or 2B finish for easy cleaning and hygiene

Outer Surface: Matte finish or insulated cladding

Capacity:

Available in sizes ranging from 100 liters to 10,000+ liters, as per requirement

Design Features:

Insulation: PUF (polyurethane foam) or Rockwool insulated jacket to maintain temperature

Agitator/Mixer (Optional): For uniform consistency of buttermilk

Manhole/Top Lid: For cleaning and inspection

Pasteurized Milk Storage Tank –
Description
We are dealing with a pasteurized milk tank capacity range 2kl to 20kl  is a hygienically designed stainless steel vessel used to store milk after pasteurization and before it proceeds to evaporation or spray drying in a milk powder plant.
It serves as an intermediate storage solution, ensuring that the pasteurized milk remains at a controlled temperature and is kept free from any contamination.
Key Features:Material: SS 304 (food grade), SS 316 (optional for higher corrosion resistance)Design: Vertical or horizontal cylindrical closed tankCapacity: Ranges from 2KL to 20KL, depending on plant sizeAgitator: Equipped with a slow-speed agitator to keep milk uniformly mixed and prevent cream separationInsulation: PUF insulated to maintain milk temperature (usually around 4°C to 6°C)Cooling Jacket: Sometimes fitted with a jacket for chilled water circulationManhole: For cleaning and inspectionCIP Spray Ball: Fitted with Cleaning-in-Place system for automatic cleaningOutlet Valve: SS Butterfly valve or sanitary valveSensors: Level indicator, temperature gauge, sometimes pressure sensors
Surface Finish: 2B or mirror finish for hygienic surface
Temperature Maintenance:Milk is stored at 4°C to preserve quality before further processing.Temperature is maintained using PUF insulation and chilled water jacket.
Usage in Milk Powder Plant:Holds pasteurized milk before it's sent to the evaporator for concentration.
Ensures a smooth flow in the production line without interruptions.
Prevents microbial growth by keeping milk under strict hygienic and thermal conditions.
Specification: Pasteurized Milk Tank (2KL to 20KL)
Parameter Details
Capacity Range 2,000 liters to 20,000 liters (2KL to 20KL)Design Type Vertical / Horizontal cylindrical closed tankMaterial of Construction SS 304 (standard), SS 316 (optional)Inner Shell Thickness 3 mm to 5 mmOuter Shell Thickness 2 mm to 3 mm (if insulated)Insulation PUF (Polyurethane Foam), 50 mm to 100 mm thickCooling Jacket Dimple or plain jacket for chilled waterSurface Finish (Inner) Mirror polish or 2B finish (Ra ≤ 0.6 µm)Surface Finish (Outer) Matt or brushed finishAgitator Type Slow-speed top or side-mounted agitatorManhole SS hinged manhole with pressure lockInlets/Outlets SS dairy-grade tri-clamp fittingsTemperature Control Digital or analog thermometerLevel Sensor Optional ultrasonic or float-type level sensorCIP System Internal spray ball for Cleaning-In-PlaceLegs/Base SS tubular legs with adjustable ball feetDrain Valve SS 304 butterfly valveDesign Pressure Atmospheric (optional up to 1 bar)Testing Hydro tested, dye-penetrant tested (welds)Compliance 3A, ISI, FSSAI, GMP, ASME (as per requirement)

 Material of Construction (MOC):
Component Material
Inner Shell SS 304 (AISI food grade) / SS 316 (optional)Outer Shell (Insulated tanks) SS 304 or MS with paint finish (budget option)Agitator Shaft & Blades SS 304 or SS 316Legs / Frame SS 304 heavy-duty pipesValves & Fittings SS 304 (Sanitary grade)Gaskets & Seals Food-grade Silicone or EPDM

We are dealing wth steam jacketed kettle(capacity range from 500l to 20kl)is a cooking vessel designed to heat large quantities of food evenly and efficiently using steam, where a double-walled construction allows steam to circulate in the outer "jacket" which transfers heat to the food inside the inner pot, providing consistent and controlled cooking with minimal scorching; commonly used in commercial kitchens and food processing facilities for tasks like making sauces, soups, and stews
A steam-jacketed kettle is a double-walled cooking vessel used to heat and cook food using steam. The outer jacket is filled with steam under pressure, which surrounds the inner pot, allowing for uniform and controlled heating. This design minimizes the risk of burning or scorching the food, making it ideal for cooking large volumes of liquid or semi-liquid foods such as soups, sauces, stews, custards, and jams. Steam-jacketed kettles are commonly made from stainless steel for durability and hygiene and often feature a tilting mechanism for easy pouring and cleaning. They are widely used in commercial kitchens, food processing plants, and institutional settings for efficient and consistent cooking.
Material:Inner Vessel: SS 304/316 food-grade stainless steelJacket: SS 304 stainless steelFinish: Mirror/matte polish (inner) and semi-gloss/matte (outer)Construction:Double-walled with steam jacketDished bottom or hemispherical shape for uniform heatingMounted on sturdy legs or frame (or floor-mounted)Jacket Pressure Rating:Designed for working steam pressure: 4–6 bar (or as required)Pressure-tested as per ASME/PED standardsHeating Source:Indirect steam via external boilerOptional: electric or gas heating elements (if self-heated)Agitator (Optional):Type: Scraper or paddle-typeMotorized with variable speed controlSuitable for viscous productsTilting Mechanism (if applicable):Manual or motorized tilting for easy dischargeTilting range: 90°Insulation:Thermal insulation with glass wool/mineral woolCladded with SS or aluminumControls (Optional):Temperature and pressure gaugesSafety valve and steam inlet/outlet controlsDigital control panel (if advanced version)Safety Features:Pressure relief valveVacuum breakerSteam trapUtilities Required:Steam: ~150–250 kg/h (depending on product and temp)Water inlet/outlet (for cleaning)Drain valve: SS ball valve or butterfly type

We are dealing in Milk storage tank and silos is a facility where raw milk collected from farms is received, tested, standardized, pasteurized, homogenized, and packaged into various dairy products like whole milk, skimmed milk, cream, yogurt, butter, and cheese, ready for distribution to consumers, ensuring quality and safety through rigorous processing steps and strict hygiene standards.it is avalable from 5KL  10kl to 20kl,30kl, and 50kl

We are dealing with a UNDERGROUND OIL storage tank (20kl to 50kl ) is a specialized container designed to safely store, mix, and process various chemicals in industrial settings, typically constructed with materials specifically chosen to withstand the corrosive properties of the chemicals it holds, and coming in various shapes and sizes depending on the type and volume of chemical being stored; it is often found in manufacturing plants, shipping areas, and pharmaceutical companies, 5kl to 50kl
Accessories:

Inlet and outlet nozzles

Manhole cover

Vent pipe Level indicator or gauge

Leak detection system (optional)

Spill containment arrangements

Applications:

Fuel retail outlets (petrol/diesel stations)

Emergency power systems (diesel generators)

Industrial and manufacturing plants

Commercial oil distribution centers

Military and aviation facilitiy

Advantages: Space-saving installation Reduced risk of fire and environmental hazards Protected from weather-related wear and vandalism Long service life with proper maintenance Technical Specification for Underground Oil Storage Tanks (5 KL to 50 KL)

1. Capacity Range:

Type: Horizontal cylindrical, underground installation

2. Material of Construction (MOC):

Shell and Dished Ends: Mild Steel (MS) conforming to IS: 2062 Grade B

 

5. Fittings and Accessories:

Item                                                Description

Manhole                                        500 mm diameter with bolted cover

Inlet Nozzle                                    2” or 3” BSP/NPT/Flanged (as required)

Outlet Nozzle                                2” or 3” BSP/NPT/Flanged

Dip Pipe / Dip Point                    For manual level measurement

Drain Valve                                   1” or 2” BSP/NPT/Flanged at the lowest point

Vent Pipe                                       2” dia pipe with flame arrester

Level Indicator                                         Float & board type or magnetic level gauge

Leak Detection Port                   Optional (especially for double-walled tanks)

 

 

 

 

 

We,GRF Dynamic Engineering, are one of the foremost manufacturers and exporters an extensive array Our offered range consists of best grade Horizontal Storage TanksA horizontal stainless steel tank of 10,000 litres (10 KL) is commonly used for storage of water, chemicals, oils, beverages, and dairy products. Below are the typical specifications and details:�� Basic SpecificationsParameter Typical Value / RangeCapacity 10,000 litres (10 KL)Orientation Horizontal cylindricalMaterial SS304 or SS316 (depending on usage)Thickness 3 mm to 6 mm (depends on pressure & use)Shape Horizontal with

We are dealing with a Cream Shuttle Storage Tank (1KL to 5KL)The Cream Shuttle Storage Tank is a specialized vessel designed for the hygienic storage and short-distance transportation of cream within dairy and food processing facilities. Ranging in capacity from 1 kiloliter (1,000 liters) to 5 kiloliters (5,000 liters), these tanks ensure safe handling, minimal product loss, and maintenance of cream quality.
Key Features:
Material:Fabricated using SS304 or SS316 stainless steel, suitable for food-grade applications and resistant to corrosion and chemical reactions.
Capacity Range:Available in standard sizes from 1KL to 5KL (customization possible based on client requirements).
Design:
Cylindrical or elliptical shape with a conical or dished bottom for complete drainage.
Insulated construction with polyurethane foam or mineral wool to maintain cream temperature.
Jacketed option available for chilled water circulation to preserve cream consistency and prevent spoilage.

Mobility & Handling:
Mounted on robust caster wheels or skid-mounted for easy movement between processing sections.
Integrated lifting lugs or forklift-friendly base for handling.

Agitation (optional):
Slow-speed agitator for gentle stirring and maintaining uniformity of the cream.

Fittings & Accessories:
Manhole for cleaning and inspection
Butterfly or ball valve outlet
Level indicator (sight glass or electronic)
CIP (Clean-In-Place) provision
Pressure-vacuum relief valve if required

Compliance:
Designed and fabricated as per 3-A, EHEDG, or GMP standards for hygienic processing


Applications:
Cream storage before pasteurization
Intermediate storage for cream transportation between processes
Temporary storage in dispatch or packing zones

Cream Shuttle Storage Tank – Technical Specifications
Parameter Specification
Capacity Range 1,000 Liters (1KL) to 5,000 Liters (5KL)Material of Construction SS304 / SS316 (Food Grade Stainless Steel)Inner Surface Finish Mirror finish / Electro-polished (Ra ≤ 0.6 µm)Outer Surface Finish Matte / 2B Finish / Polished Stainless SteelTank Shape Cylindrical or Elliptical with Conical / Dished BottomInsulation PUF / Mineral Wool (50mm–100mm, optional)Jacket Type (Optional) Dimple or Plain Jacket for Chilled Water / GlycolAgitator (Optional) Slow-speed agitator (top/bottom entry)Mobility Skid-mounted or Mobile on PU Caster Wheels (with brake)Top Manhole Hinged / Threaded / Clamp TypeInlet / Outlet TC End / DIN / SMS Standards (Customizable)Bottom Valve SS304/316 Butterfly Valve or Ball ValveLevel Indicator Sight Glass / Float Type / Ultrasonic (Optional)Temperature Gauge Digital / Analog Thermometer (Optional)CIP Provision Spray Ball / Rotary Spray HeadPressure/Vacuum Valve Optional (if sealed)Working Temperature 4°C to 45°C (customizable as per insulation & jacket)Design Pressure Atmospheric / up to 1 bar (non-pressurized application)Compliance GMP, 3-A Sanitary Standards, EHEDGDocumentation Material Test Certificates, QA/QC Report, Welding Logs


✅ Optional Add-ons:
Load cell-based weighing system
PLC-based temperature control
SS ladder and platform for larger tanks
Sampling valve

We are dealing with a SS Edible Oil Storage Tank (5KL to 50KL)

✅ General Description:
These tanks are specifically designed for the storage of edible oils such as sunflower oil, mustard oil, soybean oil, palm oil, etc. Made from food-grade stainless steel (typically SS304 or SS316), they ensure hygiene, corrosion resistance, and long-term durability.
�� Technical Specifications:
Specification Details
Material of Construction SS 304 / SS 316 (Food Grade Stainless Steel)Capacity Range 5,000 Liters (5KL) to 50,000 Liters (50KL)Design Type Vertical Cylindrical / Horizontal Cylindrical / CustomizedWall Thickness 4 mm to 8 mm (based on size and pressure requirements)Surface Finish Mirror finish / 2B / Matt finish (as per need)Insulation (Optional) PUF / Mineral Wool with Cladding for temperature controlTop Cover Fixed / Dished / Openable manhole with gasketBottom Conical / Sloped / Dish end for full drainageMounting Skirt support / Leg support / Saddle supportManhole Provided for cleaning and maintenanceNozzles Inlet, Outlet, Vent, Drain, Level Indicator, Overflow etc.Accessories Ladder, Level Gauge, Breather Valve, CIP Spray BallTesting Hydro & Radiographic test as per industry standards
�� Key Features:Hygienic Design: Seamless construction, easy to clean, compatible with CIP (Clean-in-Place) systems.Corrosion Resistant: Ideal for long-term oil storage without contamination.Leakproof & Pressure-Tested: Ensures safe handling of liquid without losses.Customizable: Can be tailored for vertical/horizontal orientation, insulation, or mobile units.
⚙ Applications:Edible oil processing plantsFood processing industriesOil refineriesPackaging & bottling unitsFMCG storage facilities

�� SS Edible Oil Storage Tank – Detailed Specification
Parameter Specification
Tank Type Vertical Cylindrical / Horizontal Cylindrical (based on installation area)Capacity Range 5,000 Liters (5KL) to 50,000 Liters (50KL)Material SS 304 / SS 316 (Food Grade)Construction TIG welded, single or double wall (with/without insulation)Wall Thickness 4 mm to 8 mm (depends on tank size and design pressure)Top Head Dished / Conical / Flat with ManholeBottom Head Conical / Dish end (for complete drainage)Manhole Ø400 mm to Ø600 mm with food-grade gasket and clamp/bolted coverInlet/Outlet Nozzles Tri-clamp or flange type – SS304/316Vent Nozzle SS304/316 with dust cap or breatherOverflow Line Provided as per designDrain Outlet Bottom side – SS ball valve or butterfly valveLevel Indicator Sight glass / Float-type / Radar-type (optional)Temperature Sensor Optional – RTD/PT100 for monitoring (if insulated or heated)Mounting Type Leg-supported / Skirt-supported / Saddle-supportedSurface Finish (Inside) Mirror / Electro-polished / 2B (as per hygienic requirement)Surface Finish (Outside) Matt / Buffed / Cladded if insulatedInsulation (Optional) 50mm PUF / Mineral wool with SS or aluminum claddingAgitator (Optional) Provided if needed (top-mounted or side entry for mild mixing)Testing Pressure 1.5 times the working pressure (typically hydro-tested)Design Code ASME / IS 2825 / GMP / Customized as per plant requirementCIP System (Optional) Provision for spray ball or rotating nozzle for Clean-in-PlaceLadder/Platform SS ladder and maintenance platform (optional for large tanks)
�� Notes:For heated oil tanks, optional steam or electrical jacket can be added.All gaskets, seals, and fittings are food-grade compliant.Tanks can be fabricated on-site (for 30KL and above) or factory-made and transported (for smaller sizes).

Palm Oil Storage Tank (10KL to 50KL)
We are dealing with a Palm oil is a widely used edible oil in food processing, cosmetics, pharmaceuticals, and biodiesel. To ensure its quality and shelf life, it must be stored in clean, temperature-controlled, and contamination-free tanks. Storage tanks ranging from 10KL to 50KL are commonly used in refineries, bottling plants, and distribution centers.
These tanks are designed for bulk storage, easy maintenance, and compliance with food safety standards. Depending on usage, tanks may be insulated, heated, and equipped with accessories like level gauges or agitators.2. Description
Item Details
Tank Type Vertical Cylindrical / HorizontalUsage Bulk storage of edible palm oil (crude/refined)Design Standard IS 803 / API 650 / ASME (if required)Mounting RCC Platform / Skid Mounted / Leg MountedOrientation Vertical (standard), Horizontal (on request)Operating Pressure AtmosphericTemperature Ambient to 80°C (higher with heating options)3. Specifications by Capacity
Capacity Diameter (mm) Height (mm) Tank Thickness Approx. Weight
10 KL 2000–2200 3000–3200 4–5 mm ~1200–1500 kg20 KL 2400–2600 4300–4500 5–6 mm ~2200–2600 kg30 KL 2700–2900 5000–5200 6 mm ~3000–3400 kg40 KL 3000–3200 5600–6000 6–8 mm ~3900–4200 kg50 KL 3400–3600 6000–6500 6–8 mm ~4800–5200 kg

> Dimensions and weight vary with material and design customization.
4. Material of Construction (MOC)
Component MOC Options
Tank Shell & Bottom Mild Steel IS 2062 / SS304 / SS316Internal Coating Food-grade epoxy coating (if MS)External Coating Epoxy Primer + Polyurethane PaintManhole Cover MS / SS, Bolted with GasketNozzles MS / SS with flangesGaskets Neoprene / EPDM (food-safe)Optional Insulation: Rockwool or PU foam with Aluminium cladding
5. Standard Fittings & AccessoriesFitting DetailsInlet & Outlet Nozzles Flanged / ScrewedVent / Breather Valve Prevents vacuum & overpressureDrain Nozzle Bottom side or cone bottom outletManhole 450 mm dia with cover & gasketLevel Indicator Glass tube / Magnetic / Radar (optional)Thermowell With thermometer or RTDHeating Coil (Optional) Steam / Electrical (SS316)Ladder / Platform MS hot dip galvanized / SS (optional)6. Additional InformationFood-grade compliant: Suitable for edible oil storage.Leak-proof: Tested with hydrostatic or pneumatic tests.Heating/Insulation: For cold regions, oil remains in liquid state.Easy Cleaning: Smooth internal surface and access manhole.Customizable: Coils, agitators, level sensors, vents, overflow lines.Maintenance: Yearly cleaning, coating touch-up recommended. Delivery: Factory-fabricated and shipped ready-to-install or in segments.

Optional Custom Features
Option                                               DetailsAgitator/Mixer                                       For homogeneous mixing of blended oilsWeighing System                               Load cell-based tank weighing systemPLC Controlled Heating                       For automated temperature regulationDouble-walled Tanks                               With jacketed heating for industrial useInternal Coil Cleaning System               Spray balls or manual CIP ports

25KL STORAGE TANK - MS IS2062 We are GRF dynamic Engineering  manufacturer of all kind of storage tanks in various material such as MS IS2062 , SS304 , SS316 , SS316L, SA516 GR70
✅ Definition:
A 25KL (25,000 litres) stainless steel tank is a high-capacity vessel designed to store, mix, or process chemicals while ensuring corrosion resistance, hygiene, and durability.
�� Specifications:
Parameter Details
Capacity 25,000 Litres (25 KL)Material of Construction (MOC) SS304 / SS316 (based on chemical compatibility)Tank Orientation Vertical or Horizontal (customizable)Wall Type Single wall or double wall (for insulation/jacketing)Thickness 4 mm to 8 mm (customizable as per pressure/usage)Top Type Dome / Flat / ConicalBottom Type Conical / Dish-end / Flat bottomMounting Type Leg-supported / Skirt / SaddleManhole Top or side manhole with gasket and clampFinish Mirror / Matt / Buffed / Pickled & PassivatedAccessories Level gauge, vent filter, pressure relief valve, etc.Agitator (if needed) Optional – for mixing or blending
�� Temperature & Pressure:
Factor Range
Operating Temperature -10°C to 150°C (can go higher for SS316)Operating Pressure Atmospheric to 3 bar (for storage); can be customized for pressure vessels


�� Finish & Sanitation:
Internal Finish: Smooth, food-grade if required (Ra < 0.8 µm)
External Finish: As per industry standards
CIP/SIP Ready (optional): For pharma & food-grade storage�� Applications:
Acid, alkali, solvent storage
Water treatment and storage
Edible oil or liquid food storage
Pharma or cosmetics intermediate tanks
�� Compliance (if needed):
ASME Sec VIII Div 1
ISO 9001:2015
GMP / FDA standards (for food/pharma)
PESO approval (for flammable substances, in India)

⚙ Design Details:
Feature Options / Description
Design Standard ASME, IS 2825, API 650 (as per usage – pharma, chemical, food, etc.)Shape Mostly vertical cylindrical; horizontal tanks also availableAgitation System Optional – Top-entry agitator, side-entry agitator (if mixing is needed)Baffles Installed inside the tank to improve mixing flow (for agitator tanks)Heating/Cooling Jacket Dimple / Limpet / Full shell jacket – Steam, Hot Water or Thermic FluidInsulation Glass wool / Rock wool / PU foam with SS304 cladding for temperature-sensitive chemicalsSeismic/ Wind Load Design For outdoor installation, especially for earthquake-prone or coastal regions
�� Safety Features:
Component Function
Pressure Relief Valve Prevent over-pressurizationBreather Valve / Vent Allows air flow while preventing contaminationOverflow Nozzle Prevents spillage during overfillingLevel Indicators Sight glass / Magnetic level gauge / Radar level sensor (for automation)Earthing Lug Prevents static charge buildup, especially for flammable chemicalsSampling Valve For periodic sampling without contamination
�� Manufacturing Process:1. Material Procurement – Certified SS304/316 with test certificates2. Shell & Dished End Forming3. Welding – TIG/MIG with radiography (if required)4. Surface Treatment – Pickling, Passivation, Mirror or Matt finish5. Quality Testing – Hydro test, Dye Penetrant Test (DPT), Ultrasonic Testing (UT)6. Final QC & Dispatch
�� Optional Add-ons:
Feature Benefit
PLC / SCADA Integration Real-time monitoring and automationLoad Cell System Accurate weight-based measurement of stored chemicalsSpray Ball (CIP) Internal cleaning system – Clean-In-PlaceSkid Mounted Easy to install and relocateFoundation Bolts For anchoring the tank in industrial setup
�� Approximate Dimensions (for Vertical Tank):
Dimension Range (Customizable)
Diameter 2200 – 3000 mmHeight 4000 – 6000 mmThickness 4 – 8 mm

We are GRF Dynamic Enginnering dealing with stainless steel HSD(HIGH SPEED DIESEL) 
Here’s a detailed technical and commercial overview of a 3KL (3000 litres) Stainless Steel HSD (High Speed Diesel) Storage Tank used for fuel storage in industrial or commercial settings:�� 1. Basic Tank SpecificatioNParameter DetailsCapacity 3000 Litres (3 Kilolitres)Material Stainless Steel SS304 / SS316Type Cylindrical or Rectangular (horizontal or vertical)Use Storage of HSD (High Speed Diesel), Fuel, OilDesign Atmospheric or Pressurized (as per application)
�� 2. Dimensions (Typical for Horizontal Cylindrical Tank)
Component Approx. Size
Diameter ~1200–1400 mmLength ~2000–2200 mmShell Thickness 4–6 mm (depending on design pressure)End Dish Thickness 5–8 mmMounting Skid-mounted / Leg support / Saddle support�� 3. Fittings & AccessoriesComponent Description
Manhole 450mm–600mm diameter, top-mountedInlet/Outlet Nozzles 2" or 3" Flanged or threaded (BSP/NPT)Drain Valve Provided at bottomVent Flame arrester type or breather valveLevel Indicator Sight glass or magnetic level indicatorDipstick Stainless Steel or brassEarthing Lug For safety (anti-static)Ladder/Platform Optional, for rooftop accessBund Wall Tray Optional for leakage containment�� 4. Working ConditionsParameter ValueDesign Pressure Atmospheric / up to 1 bar if requiredTemperature Range Ambient (0°C to 65°C)Corrosion Resistance High (especially in SS316)Fuel Compatibility Diesel, Petrol, Kerosene, Bio-diesel�� 5. Standards & ComplianceIS 803 – Code of Practice for Design of Storage TanksAPI 650 / 620 – For welded tanksPESO approval – May be required for fuel storage (India)ASME / EN norms – For pressurized variants�� 6. Optional FeaturesDouble-walled tank (for extra safety)Heat tracing (if used in cold areas)Painting or coating (for aesthetics)Flow meter and pump system integrationATG (Automatic Tank Gauging system)
�� 8. ApplicationsFuel stations (diesel/petrol)Generator diesel storageIndustrial plantsFleet fueling stationsEmergency diesel backup storage (hospitals, data centers)
�� 9. Detailed Construction DetailsSection DescriptionShell Rolled from SS304 or SS316 sheet (Grade 2B finish or shot-blasted for durability)Ends Dished (torispherical) or flat ends, weldedWelding Full penetration TIG/MIG welding with 100% radiography (optional)Mounting Type Saddle support (for horizontal), Skirt/legs (for vertical)Reinforcement Pads Provided at all nozzle connections to avoid stress concentrationInspection Port Optional – for internal cleaning accessGasket Material Viton, EPDM, or PTFE (fuel-resistant)�� 10. Safety FeaturesFeature PurposeFlame Arrestor Prevents external flame entry through ventBreather Valve Avoids vacuum or pressure buildupEarthing Lugs (2 or more) To dissipate static charge buildupBund Wall Tray or Containment Pit Prevents environmental leakageLockable Manhole/Inlet Security against theft or tampering�� 11. Fire & Explosion Risk MitigationExplosion-proof fittings (ATEX-certified if required)Static electricity precautions: grounding strapsAnti-spill check valvesEmergency vent valves for overpressure release�� 12. Installation RequirementsAspect DetailsFoundation RCC base slab or steel skid baseAnchor Bolts Required for wind/seismic zonesClearance ~500mm min clearance on all sidesBund Wall Capacity Should be 110% of tank volumePiping Layout With isolation valves and flexible joints to avoid thermal stress�� 13. Cleaning & MaintenanceTask FrequencyInternal cleaning Every 6–12 monthsExternal polish or coating Once a year (if painted/coated)Leak testing Hydro test every 2–3 years or as per PESO normsVent check Every 6 months to avoid blockageDiesel sediment check Every 6–8 months using drain valve

we GRF DYNAMIC ENGINEERING dealing with A SS Chemical Horizontal Storage Tank –capacity range: 5kl to 50kl

DescriptionThe SS Chemical Horizontal Storage Tank is a robust and corrosion-resistant vessel designed for the safe storage of a wide range of industrial chemicals. Fabricated from high-grade stainless steel (SS304 or SS316), this tank offers excellent durability, chemical compatibility, and hygienic properties, making it ideal for use in chemical processing plants, pharmaceutical industries, water treatment facilities, and food-grade applications.
Its horizontal cylindrical design, typically supported on saddles or cradles, provides stability and ease of access for installation, maintenance, and discharge operations. The tank can be customized with features such as manholes, nozzles, level indicators, agitators, insulation, and safety valves, depending on the specific application.Stainless Steel Chemical Horizontal Tank (5KL to 50KL)
Our Stainless Steel Chemical Horizontal Tanks, ranging from 5 kiloliters (KL) to 50KL, are designed for efficient and secure storage of corrosive and non-corrosive chemicals in industrial environments. Fabricated from high-quality SS304 or SS316 stainless steel, these tanks offer superior corrosion resistance, high durability, and long service life, even under harsh processing conditions.
Each tank features a horizontal cylindrical structure with reinforced saddle supports for stable mounting. The smooth, polished internal surface ensures easy cleaning and minimizes contamination risks—making these tanks suitable for applications in chemical processing, pharmaceuticals, food and beverage, water treatment, and petrochemicals.
Key Features:
Capacity Range: 5KL to 50KL
Material: SS304 / SS316 (customizable based on media compatibility)
Design: Horizontal cylindrical with structural saddles
Finish: Mirror or matte polish (as required)
Fittings: Inlet/outlet nozzles, vent, manhole, drain, level indicator, pressure/vacuum relief valve
Optional Add-ons: Agitators, insulation and cladding, heating/cooling jackets
Installation: Skid-mounted or fixed, suitable for both indoor and outdoor use
Standards: Designed and tested as per ASME, IS, or customer-specific standards

These tanks are engineered to meet your operational, safety, and regulatory requirements with flexible customization options available upon request.
Q🛠 Technical Specifications – Stainless Steel Chemical Horizontal Tank (5KL–50KL)
Parameter Specification
Capacity Range 5,000 Liters (5KL) to 50,000 Liters (50KL)Material of Construction SS304 / SS316 / SS316L (as per chemical compatibility)Tank Orientation Horizontal cylindrical with dished endsSupport Type MS/SS Saddle Supports with base plates for anchoringDesign Pressure Atmospheric to 3 bar (customizable based on requirement)Design Temperature -10°C to +120°C (higher on request)Corrosion Allowance 1.5 mm (optional, based on chemical handled)Internal Finish Mirror / 2B / Electro-polished (based on application)External Finish Matte / Buffed / Painted / CladdedManhole DN450 to DN600 (top or side access, bolted or hinged)Nozzles Inlet, Outlet, Drain, Vent, Level Gauge, PRV/Vacuum Breaker (Flanged or threaded)Agitator Optional (top-mounted / side-mounted, with motor sizing as per viscosity)Insulation & Cladding Optional (Rockwool or PU Foam with SS or Aluminum Cladding)Jacket / Coil Optional (for heating or cooling; steam, oil, or water-compatible)Mounting Skid-mounted or RCC platform (field-installed)Standards Followed ASME Section VIII Div. 1 / IS 2825 / API 650 / GMP (as per requirement)Testing Hydrotest (1.5x design pressure), Dye Penetrant Test (DPT), Material TraceabilityAccessories (Optional) Level indicators, Temperature sensors, Pressure gauges, Sampling ports

A 5kl to 50kl MS (Mild Steel) chemical tank is an industrial container made from mild steel, designed to store or process various types of chemicals. Here's a typical description:An MS Chemical Tank is a robust storage vessel constructed using mild steel—a type of carbon steel with low carbon content, offering good weldability and strength. These tanks are commonly used in industries such as chemical processing, pharmaceuticals, water treatment, and petroleum for the storage or mixing of non-corrosive or mildly corrosive chemicals.
Key Features:
Material: Mild Steel (conforming to IS 2062 or equivalent)
Capacity: Customizable (ranging from 500 liters to over 50,000 liters)
Design: Vertical or horizontal cylindrical, rectangular, or conical shapes
Finish: Painted, epoxy-coated, or rubber-lined for corrosion resistance
Mounting: Skid-mounted or leg-supported
Accessories: Manhole, drain valve, level indicators, inlet/outlet nozzles, vent, etc.

Applications:
Chemical storage and mixing
Water and wastewater treatment
Oil and lubricant storage
Industrial and process applications

Advantages:
High mechanical strength
Cost-effective compared to stainless steel

We are dealing with (capacity rane from 10kl to 100kl) A stainless steel brewery tank is a specialized vessel used in the beer brewing process, made from high-grade stainless steel (typically 304 or 316) to ensure durability, corrosion resistance, and ease of sanitation. These tanks come in various types depending on their purpose, including:

1. Introduction:
A 10,000-liter (10KL) stainless steel brewery tank is used in breweries for fermenting, storing, or conditioning beer. It's made of food-grade stainless steel (SS 304 or SS 316) to ensure hygiene and durability.
✅ 2. Application:
Beer fermentation
Maturation / Conditioning
Temporary storage
Brewing process support
✅ 3. Material of Construction (MOC):
Inner shell:                   SS 304 / SS 316 (food grade)
Outer shell (optional):    SS 304 or Mild Steel with insulation
Jacket (optional):           Dimple/half-pipe jacket for cooling
Insulation:                    Polyurethane Foam (PUF) or Rockwool (50-100 mm)
Finish:                          Mirror polish or 2B finish inside
✅ 4. Capacity:
Effective Volume:          10,000 liters
Gross Volume:              10,500 to 11,000 liters (for foam headspace)

✅ 5. Basic Specifications:
Parameter                             Details
Type                                     Cylindrical vertical

tankCapacity                         10,000 liters

Orientation                            Vertical

Legs                                     3 or 4

top cover                              dome/conical/ or flate with manhole

Bottom                                 conical/dish type

Cooling jacket                       optional for tem.control

Manhole & nozzale                 yes

valves/ ports                         sampling valve / discharge valve 

Pressure                               atmosspheric or low pressure rated 

Temperature                         -5°C to 60°C (with jacket)

✅ 6. Optional Features:
Digital temperature sensor
Pressure gauge
Agitator (if needed)
Level indicator
Sight glass
Foam trap
✅7. Usage Environment:
Breweries (micro, craft, commercial)
Beverage industry
Pilot beer plants

We are dealing with a Stainless Steel Acid Storage Tank (2KL to 20KL):
Stainless Steel Acid Storage Tanks are specially designed to safely store corrosive and hazardous chemicals like sulfuric acid, hydrochloric acid, nitric acid, and similar aggressive fluids. These tanks are constructed using high-grade stainless steel (typically SS316 or SS316L) known for its excellent corrosion resistance and chemical compatibility.
These tanks are available in vertical or horizontal configurations and can be equipped with safety features such as vent nozzles, overflow lines, and acid-resistant linings or coatings for added protection. They are commonly used in chemical processing plants, water treatment facilities, pharmaceutical industries, and other sectors requiring secure acid handling and storage.
Specifications – Stainless Steel Acid Storage Tank (2KL to 20KL)
Parameter Details
Capacity Range 2,000 Liters (2KL) to 20,000 Liters (20KL)
Material of Construction (MOC) SS316 / SS316L (High corrosion resistance)Tank Orientation Vertical / Horizontal (as per requirement)Wall Thickness 4 mm to 10 mm (depending on capacity and pressure)Design Type Cylindrical with dished ends or flat bottomSupport Type Skirt / Leg / Saddle supportTop Type Conical / Dome / Flat topBottom Type Conical / Dish end / Flat bottomSurface Finish Mirror / Matte / Pickled & PassivatedManhole Provided with bolted cover (typically 18" to 24")Nozzles Inlet, Outlet, Vent, Drain, Level, and OverflowGaskets & Seals PTFE or Viton (acid-resistant)Test Pressure 1.5 to 2 times the working pressureWorking Temperature -10°C to +100°C (customizable)Accessories Ladder, Platform, Level Gauge, Vent FilterStandard Compliance ASME / IS / DIN / GMP as required
Chemical CompatibilitySuitable for Sulfuric Acid, Hydrochloric Acid, Nitric Acid, Phosphoric Acid, and other industrial-grade corrosive chemicals.SS316/316L offers superior resistance to pitting, stress corrosion cracking, and oxidation.
Construction & DesignWelded construction with 100% radiography (as per requirement).Seamless internal welding to avoid acid buildup.Optional rubber lining, FRP coating, or PTFE lining for enhanced corrosion protection (for aggressive acids).Built with expansion joints or pressure vacuum relief valves for safety.
Safety FeaturesPressure Relief Valve or rupture disk.Earthing provision for anti-static safety.Emergency venting system for overpressure conditions.Secondary containment (optional) for spill protection.
Optional AccessoriesAcid-resistant level indicators (magnetic or glass tube type).Temperature sensors with digital display.Agitator / stirrer for mixing applications.Insulation with cladding for temperature-sensitive storage.
Certifications (Optional as per order)ASME Sec VIII Div. 1ISO 9001:2015
GMP compliant (for pharma)Pressure Equipment Directive (PED) – for exportStandard 

We are GRF DYNAMIC ENGINEERING dealing with SS MIXING KETTLES 500 LITRE 
Here are the complete technical, design, and application details of a 1000 Litre Stainless Steel (SS) Mixing Kettle, commonly used in food, chemical, cosmetic, and pharmaceutical industries:

---
🔩 Basic Specifications
Feature Specification
Capacity 1000 Litres (1 KL)Material SS304 or SS316 (depends on application)Construction Type Vertical cylindrical with dished endsMounting Type Leg-supported / Skid-mounted / Platform-mountedAgitator Type Anchor, paddle, propeller, or turbine typeMotor HP 1.5–5 HP (depending on viscosity and RPM)Mixing Speed Variable: 10–100 RPM (with VFD optional)Top Cover Openable or fixed with manholeJacketed Option Yes, for heating/cooling (Steam, Hot water, or Oil)Insulation Rockwool/Glasswool with SS cladding (optional)🌡 Temperature & Pressure RatingsParameter ValueDesign Temp Up to 150°C (depends on jacket media)Working Pressure (Jacket) 2–3 barWorking Pressure (Vessel) Atmospheric or up to 1 bar (non-pressure vessel)Test Pressure Jacket: up to 5 bar⚙ Mechanical DetailsShaft: SS316, ground and polishedSealing: Mechanical seal or stuffing boxBearings: Heavy-duty flange typeManhole: 300–400 mm dia with gasket and lockingNozzles/Inlets:Inlet for raw materialVent / Air release valveTemperature sensor portDrain valve (bottom outlet) – Ball or butterfly type🔌 Electrical & AutomationMotor: Flameproof or standard as requiredGearbox: Helical/planetary reduction typeControl Panel: Optional, with VFD and temperature controllerSensors: Optional RTD/PT100 for temp monitoring🧴 ApplicationsIndustry UsageFood Sauces, jam, ghee, cream mixingPharma Syrups, suspensions, semi-solidsCosmetics Lotions, shampoos, creamsChemical Emulsions, resin, glue, and more📏 Typical Dimensions (can vary by design)Parameter ValueDiameter ~1000–1200 mmHeight (without motor) ~1500 mmThickness Shell: 3–5 mm; Bottom: 5 mm; Jacket: 3 mm🛠 Optional FeaturesCIP (Clean-in-Place) spray ballsLoad cells (for weighing)Flameproof motors for hazardous areasSight glass, level indicatorBottom dished/hemispherical headPLC-based automationHere are the complete technical, design, and application details of a 1000 Litre Stainless Steel (SS) Mixing Kettle, commonly used in food, chemical, cosmetic, and pharmaceutical industries:
🔩 Basic Specifications
Feature Specification
Capacity 1000 Litres (1 KL)
Material SS304 or SS316 (depends on application)
Construction Type Vertical cylindrical with dished ends
Mounting Type Leg-supported / Skid-mounted / Platform-mounted
Agitator Type Anchor, paddle, propeller, or turbine type
Motor HP 1.5–5 HP (depending on viscosity and RPM)
Mixing Speed Variable: 10–100 RPM (with VFD optional)
Top Cover Openable or fixed with manhole
Jacketed Option Yes, for heating/cooling (Steam, Hot water, or Oil)
Insulation Rockwool/Glasswool with SS cladding (optional)
Temperature & Pressure Ratings
Parameter Value
Design Temp Up to 150°C (depends on jacket media)
Working Pressure (Jacket) 2–3 bar
Working Pressure (Vessel) Atmospheric or up to 1 bar (non-pressure vessel)
Test Pressure Jacket: up to 5 bar
⚙ Mechanical Details
Shaft: SS316, ground and polished
Sealing: Mechanical seal or stuffing box
Bearings: Heavy-duty flange type
Manhole: 300–400 mm dia with gasket and locking
Nozzles/Inlets:
Inlet for raw material
Vent / Air release valve
Temperature sensor port
Drain valve (bottom outlet) – Ball or butterfly type

Designed and manufactured to perfection, our company is considered as one of the renowned and preeminent manufacturers and suppliers of Chemical Reactor Vessel. Designed using premium metallic alloys, these have accurate dimensions, sturdy construction and can withstand temperature fluctuations.
Some of the quality features possessed by our product wide range are listed below:

Features :

· Magnetically coupled agitated vessels for vaccines

· Blending/mixing vessels for liquid oral, IV fluid, injectables and other liquid applications

· Storage tanks for water for injection and purified water storage systems

· Pressure vessel for various applications

· GMP reactors for crystallization, blending, heat transfer application with scrapper with agitator, anchor agitator, custom built agitation solutions

· Sterilizers for intravenous system

Applications :

· Chemical industry

· Pharmaceutical industry

We are dealing with a Slurry Tank (Capacity: 10 KL to 50 KL)
The Slurry Tank is a robust and durable storage solution designed for handling, storing, and processing slurry mixtures in industrial environments. Available in a range of capacities from 10 kiloliters (KL) to 50 kiloliters (KL), these tanks are engineered to meet varying operational requirements across sectors such as mining, chemical processing, wastewater treatment, and construction.
Features:Material of Construction: MS/SS304/SS316/FRP-lined depending on slurry type and chemical compatibility
Design Pressure: Atmospheric or pressurized as per requirement
Mounting Type: Vertical or horizontal, skid-mounted or fixed base
Agitator Provision: Optional mechanical agitator for continuous mixing to prevent sedimentation
Nozzles & Fittings: Inlet, outlet, overflow, drain, vent, and manhole with optional instrumentation ports
Access: Top or side manhole for maintenance and cleaning
Coating & Lining: Epoxy or rubber lining for corrosion and abrasion resistance
Level Indication: Level gauge or radar level sensor provision
Safety Features: Pressure relief valve, earthing lugs, and overfill prevention system

Applications:
Sludge and slurry storage in wastewater treatment plants
Fly ash and bottom ash handling in power plants
Lime and bentonite slurry in construction and drilling
Chemical slurries in process industries

Customization Options:
Heating or cooling jacket
Agitator type and motor rating
Automation and level monitoring systems
Mobile or skid-mounted design for easy relocation

Slurry Tank – Technical Specifications
Parameter Specification
Capacity Range 10 KL to 50 KLType Vertical / Horizontal (based on application)Material of Construction (MOC) MS (IS 2062), SS304, SS316, FRP-lined (as per slurry type)Design Code ASME Sec VIII Div 1 / IS 2825 / API standards (as applicable)Design Pressure Atmospheric / Pressurized up to 3 barDesign Temperature Up to 120°C (customizable)Agitator (Optional) Top or side-mounted mechanical agitator with VFD motorLining / Coating Epoxy, rubber, FRP, or ceramic lining (based on slurry type)Nozzles Inlet, Outlet, Drain, Vent, Overflow, ManholeManhole Top or side access with bolted coverLevel Indicator Float-type / Sight glass / Radar level sensor (optional)Supports / Mounting Skid-mounted / RCC foundation with saddle or leg supportsFinish (External) Red oxide primer + 2 coats of epoxy or polyurethane paintMixing System (Optional) Impeller type: PBT, Anchor, or Turbine with gearbox motorTesting Hydro-tested / Pneumatic tested as per design codeAccessories Pressure relief valve, temperature sensor, level gaugeCertifications Material Test Certificates, Welding Certifications, QA/QC docs

We are dealing with Coil Heat Exchanger – 40 sq.m (Square Meter)
A CMM Coil Heat Exchanger is a Compact Multi Metal Coil type heat exchanger, often used for indirect heating/cooling in process industries. The 20 sq.m refers to the total heat transfer surface area of the coil.
�� 1. General Description
A coil-type heat exchanger where fluid or gas flows inside the coil, while the other medium flows outside the coil or in the shell.
Material can vary depending on application: commonly Copper, Mild Steel (MS), Stainless Steel (SS304/316), or Cu-Ni alloy.
20 m² surface area helps determine heat transfer capacity (Q = UAΔT).


---
�� 2. Technical Specifications
Feature                Details
Heat Transfer Area    20 square metersType                        Coil-in-shell / Immersion coilTube Diameter        12.7 mm to 25.4 mm (customizable)Coil Length        Approx. 15–30 meters (depending on diameter)Tube Thickness       1.2 mm – 2 mm (based on pressure rating)Material (MOC)       Copper, SS304/316, Cu-Ni, or MSShell Material       SS/MS/FRP (if part of shell & tube setup)No. of Passes       1, 2, or 4 passes (based on flow requirement)Connections       Inlet/Outlet – threaded or flangedDesign Pressure       Up to 10 bar (standard); custom on requestDesign Temperature  -20°C to 150°C or more (based on MOC)
⚙ 3. ApplicationsChemical processingPharmaceutical industriesDairy and food processingDistilleries and breweriesWater chilling or heatingSolar water heating systems
�� 4. Operating ConditionsOperating Pressure: 2–6 bar standard; higher on request.Operating Temperature: Up to 150°C for SS, 100°C for copper coils.Can work with steam, hot water, refrigerants, oils, glycol, etc.
✅ 5. AdvantagesHigh efficiency in compact spaceEasy cleaning and maintenanceCustomizable coil arrangementSuitable for high-temperature operations
Corrosion-resistant (if SS or Cu used)�� Notes:Coil area directly affects the heat load capacity (kW).Coil can be mounted horizontally or vertically.Ensure proper fluid velocity to avoid fouling.Let me know if you need:A technical drawing or schematicHeat duty or load calculationsPrice estimate or vendor suggestions in IndiaMaterial selection help based on your fluid

we are dealing with (capacity range frome 5kl to 20kl) A wine and beer fermentation tank is a vessel where the fermentation process takes place—this is when yeast converts sugars into alcohol and carbon dioxide. These tanks come in various sizes and materials depending on the scale and type of production. Here's a quick breakdown:

1. Common Materials
Stainless Steel: Most common in commercial operations; easy to clean and sanitize, non-reactive.
Food-Grade Plastic: Used by home brewers and small-scale operations.
Oak Barrels: Primarily for wine or specialty beers for added flavor.

2. Tank Features
Temperature Control: Crucial for consistent fermentation; includes cooling jackets or internal coils.
Airlocks or Seals: Allow CO₂ to escape while preventing oxygen and contaminants from entering.
Conical Bottoms (for beer): Allow for easy removal of yeast and sediment.
Manways & Valves: For access and transferring liquids.
3. Fermentation ProcessWine Fermentation: Typically slower, conducted at 15–30°C, depending on the wine type.Beer Fermentation: Usually at 10–25°C, depending on whether it’s an ale or lager.. Industrial / Commercial Fermentation Tank
Capacity: 5,000 – 100,000+ litersMaterial: Stainless steel (316L for better corrosion resistance)Shape: Cylindrical with cone or dish bottomFeatures:
Advanced PLC or SCADA temperature and pressure controlMulti-zone glycol jacketsSight glassesPressure rating: 1 – 2 bar (for beer; wine tanks are usually non-pressurized)Top manway for dry hopping or additive insertion (beer)Insulation and cladding

We are enlisted among st leading and trusted companies for offering a wide range of Multi Stirred Mixing Tank. Specifications:Size: CustomizedMaterial: Stainless steelCapacity: 10000 LUses:Chemical IndustryPharmaceuticals Industries
⚙ Design Details:
Feature Options / Description
Design Standard ASME, IS 2825, API 650 (as per usage – pharma, chemical, food, etc.)Shape Mostly vertical cylindrical; horizontal tanks also availableAgitation System Optional – Top-entry agitator, side-entry agitator (if mixing is needed)Baffles Installed inside the tank to improve mixing flow (for agitator tanks)Heating/Cooling Jacket Dimple / Limpet / Full shell jacket – Steam, Hot Water or Thermic FluidInsulation Glass wool / Rock wool / PU foam with SS304 cladding for temperature-sensitive chemicalsSeismic/ Wind Load Design For outdoor installation, especially for earthquake-prone or coastal regions
🔒 Safety Features:
Component Function
Pressure Relief Valve Prevent over-pressurizationBreather Valve / Vent Allows air flow while preventing contaminationOverflow Nozzle Prevents spillage during overfillingLevel Indicators Sight glass / Magnetic level gauge / Radar level sensor (for automation)Earthing Lug Prevents static charge buildup, especially for flammable chemicalsSampling Valve For periodic sampling without contamination
🏗 Manufacturing Process:1. Material Procurement – Certified SS304/316 with test certificates2. Shell & Dished End Forming3. Welding – TIG/MIG with radiography (if required)4. Surface Treatment – Pickling, Passivation, Mirror or Matt finish5. Quality Testing – Hydro test, Dye Penetrant Test (DPT), Ultrasonic Testing (UT)6. Final QC & Dispatch🔌 Optional Add-ons:
Feature Benefit
PLC / SCADA Integration Real-time monitoring and automationLoad Cell System Accurate weight-based measurement of stored chemicalsSpray Ball (CIP) Internal cleaning system – Clean-In-PlaceSkid Mounted Easy to install and relocateFoundation Bolts For anchoring the tank in industrial setup
📐 Approximate Dimensions (for Vertical Tank):
Dimension Range (Customizable)
Diameter 2200 – 3000 mmHeight 4000 – 6000 mmThickness 4 – 8 mm
⚙ Design Details:
Feature Options / Description
Design Standard ASME, IS 2825, API 650 (as per usage – pharma, chemical, food, etc.)Shape Mostly vertical cylindrical; horizontal tanks also availableAgitation System Optional – Top-entry agitator, side-entry agitator (if mixing is needed)Baffles Installed inside the tank to improve mixing flow (for agitator tanks)Heating/Cooling Jacket Dimple / Limpet / Full shell jacket – Steam, Hot Water or Thermic FluidInsulation Glass wool / Rock wool / PU foam with SS304 cladding for temperature-sensitive chemicalsSeismic/ Wind Load Design For outdoor installation, especially for earthquake-prone or coastal regions


---
🔒 Safety Features:
Component Function
Pressure Relief Valve Prevent over-pressurizationBreather Valve / Vent Allows air flow while preventing contaminationOverflow Nozzle Prevents spillage during overfillingLevel Indicators Sight glass / Magnetic level gauge / Radar level sensor (for automation)Earthing Lug Prevents static charge buildup, especially for flammable chemicalsSampling Valve For periodic sampling without contamination


---
🏗 Manufacturing Process:
1. Material Procurement – Certified SS304/316 with test certificates

2. Shell & Dished End Forming

3. Welding – TIG/MIG with radiography (if required)

4. Surface Treatment – Pickling, Passivation, Mirror or Matt finish

5. Quality Testing – Hydro test, Dye Penetrant Test (DPT), Ultrasonic Testing (UT)